Showing posts with label 4-20mA. Show all posts
Showing posts with label 4-20mA. Show all posts
Thursday, April 9, 2009
4-20mA Current Loop Receiver with Input Overload
Protection circuit
The RCV420 is a precision current-loop receiver designed
to convert a 4–20mA input signal into a 0–5V
output signal. As a monolithic circuit, it offers high
reliability at low cost. The circuit consists of a premium
grade operational amplifier, an on-chip precision
resistor network, and a precision 10V reference. The
RCV420 features 0.1% overall conversion accuracy,
86dB CMR, and ±40V common-mode input range.
FEATURES
-COMPLETE 4-20mA TO 0-5V CONVERSION
- INTERNAL SENSE RESISTORS
-PRECISION 10V REFERENCE
- BUILT-IN LEVEL-SHIFTING
- ±40V COMMON-MODE INPUT RANGE
- 0.1% OVERALL CONVERSION ACCURACY
- HIGH NOISE IMMUNITY: 86dB CMR
A current-sensing circuit derives its power from the
to convert a 4–20mA input signal into a 0–5V
output signal. As a monolithic circuit, it offers high
reliability at low cost. The circuit consists of a premium
grade operational amplifier, an on-chip precision
resistor network, and a precision 10V reference. The
RCV420 features 0.1% overall conversion accuracy,
86dB CMR, and ±40V common-mode input range.
FEATURES
-COMPLETE 4-20mA TO 0-5V CONVERSION
- INTERNAL SENSE RESISTORS
-PRECISION 10V REFERENCE
- BUILT-IN LEVEL-SHIFTING
- ±40V COMMON-MODE INPUT RANGE
- 0.1% OVERALL CONVERSION ACCURACY
- HIGH NOISE IMMUNITY: 86dB CMR
A current-sensing circuit derives its power from the
4-20-mA current loop.
4-20mA Current Loop Receiver with fault protection and
digital-signal recovery circuit
digital-signal recovery circuit
Figure shows one form of flexible fault protection for the 24VDC
power supply of a 4-20mA loop. Also included is circuitry for recovering
a digital signal superimposed on that loop. U1 (a high-side current-
sense amplifier with comparator and reference) senses the loop current
in R1 as an 8-40mV voltage and amplifies it by 100, producing an
output-voltage range of 0.8V to 4V. That output (VOUT) can directly
drive external meters, strip-chart recorders, and A/D converter inputs.
More pdf
power supply of a 4-20mA loop. Also included is circuitry for recovering
a digital signal superimposed on that loop. U1 (a high-side current-
sense amplifier with comparator and reference) senses the loop current
in R1 as an 8-40mV voltage and amplifies it by 100, producing an
output-voltage range of 0.8V to 4V. That output (VOUT) can directly
drive external meters, strip-chart recorders, and A/D converter inputs.
More pdf
4-20mA Current Loop Receiver with Input Overload
Protection circuit
The RCV420 is a precision current-loop receiver designed
to convert a 4–20mA input signal into a 0–5V
output signal. As a monolithic circuit, it offers high
reliability at low cost. The circuit consists of a premium
grade operational amplifier, an on-chip precision
resistor network, and a precision 10V reference. The
RCV420 features 0.1% overall conversion accuracy,
86dB CMR, and ±40V common-mode input range.
FEATURES
-COMPLETE 4-20mA TO 0-5V CONVERSION
- INTERNAL SENSE RESISTORS
-PRECISION 10V REFERENCE
- BUILT-IN LEVEL-SHIFTING
- ±40V COMMON-MODE INPUT RANGE
- 0.1% OVERALL CONVERSION ACCURACY
- HIGH NOISE IMMUNITY: 86dB CMR
A current-sensing circuit derives its power from the
to convert a 4–20mA input signal into a 0–5V
output signal. As a monolithic circuit, it offers high
reliability at low cost. The circuit consists of a premium
grade operational amplifier, an on-chip precision
resistor network, and a precision 10V reference. The
RCV420 features 0.1% overall conversion accuracy,
86dB CMR, and ±40V common-mode input range.
FEATURES
-COMPLETE 4-20mA TO 0-5V CONVERSION
- INTERNAL SENSE RESISTORS
-PRECISION 10V REFERENCE
- BUILT-IN LEVEL-SHIFTING
- ±40V COMMON-MODE INPUT RANGE
- 0.1% OVERALL CONVERSION ACCURACY
- HIGH NOISE IMMUNITY: 86dB CMR
A current-sensing circuit derives its power from the
4-20-mA current loop.
4-20mA Current Loop Receiver with fault protection and
digital-signal recovery circuit
digital-signal recovery circuit
Figure shows one form of flexible fault protection for the 24VDC
power supply of a 4-20mA loop. Also included is circuitry for recovering
a digital signal superimposed on that loop. U1 (a high-side current-
sense amplifier with comparator and reference) senses the loop current
in R1 as an 8-40mV voltage and amplifies it by 100, producing an
output-voltage range of 0.8V to 4V. That output (VOUT) can directly
drive external meters, strip-chart recorders, and A/D converter inputs.
More pdf
power supply of a 4-20mA loop. Also included is circuitry for recovering
a digital signal superimposed on that loop. U1 (a high-side current-
sense amplifier with comparator and reference) senses the loop current
in R1 as an 8-40mV voltage and amplifies it by 100, producing an
output-voltage range of 0.8V to 4V. That output (VOUT) can directly
drive external meters, strip-chart recorders, and A/D converter inputs.
More pdf
Wednesday, April 8, 2009
Complete 4-20mA Pressure Transducer Solution with
PGA309 and XTR117
The XTR117 is a precision current output converter designed
to transmit analog 4-20mA signals over an industry-standard
current loop. It provides accurate current scaling and output
current limit functions.
XTR117 datasheet pdf
The PGA309 is a programmable analog signal conditioner
designed for bridge sensors. The analog signal path amplifies
the sensor signal and provides digital calibration for
zero, span, zero drift, span drift, and sensor linearization
errors with applied stress (pressure, strain, etc.). The calibration
is done via a One-Wire digital serial interface or
through a Two-Wire industry-standard connection. The
calibration parameters are stored in external nonvolatile
memory (typically SOT23-5) to eliminate manual trimming
and achieve long-term stability.
PGA309 datasheet pdf
The XTR117 is a precision current output converter designed
to transmit analog 4-20mA signals over an industry-standard
current loop. It provides accurate current scaling and output
current limit functions.
XTR117 datasheet pdf
The PGA309 is a programmable analog signal conditioner
designed for bridge sensors. The analog signal path amplifies
the sensor signal and provides digital calibration for
zero, span, zero drift, span drift, and sensor linearization
errors with applied stress (pressure, strain, etc.). The calibration
is done via a One-Wire digital serial interface or
through a Two-Wire industry-standard connection. The
calibration parameters are stored in external nonvolatile
memory (typically SOT23-5) to eliminate manual trimming
and achieve long-term stability.
PGA309 datasheet pdf
Complete 4-20mA Pressure Transducer Solution with
PGA309 and XTR117
The XTR117 is a precision current output converter designed
to transmit analog 4-20mA signals over an industry-standard
current loop. It provides accurate current scaling and output
current limit functions.
XTR117 datasheet pdf
The PGA309 is a programmable analog signal conditioner
designed for bridge sensors. The analog signal path amplifies
the sensor signal and provides digital calibration for
zero, span, zero drift, span drift, and sensor linearization
errors with applied stress (pressure, strain, etc.). The calibration
is done via a One-Wire digital serial interface or
through a Two-Wire industry-standard connection. The
calibration parameters are stored in external nonvolatile
memory (typically SOT23-5) to eliminate manual trimming
and achieve long-term stability.
PGA309 datasheet pdf
The XTR117 is a precision current output converter designed
to transmit analog 4-20mA signals over an industry-standard
current loop. It provides accurate current scaling and output
current limit functions.
XTR117 datasheet pdf
The PGA309 is a programmable analog signal conditioner
designed for bridge sensors. The analog signal path amplifies
the sensor signal and provides digital calibration for
zero, span, zero drift, span drift, and sensor linearization
errors with applied stress (pressure, strain, etc.). The calibration
is done via a One-Wire digital serial interface or
through a Two-Wire industry-standard connection. The
calibration parameters are stored in external nonvolatile
memory (typically SOT23-5) to eliminate manual trimming
and achieve long-term stability.
PGA309 datasheet pdf
Tuesday, April 7, 2009
The XTR117 is a precision current output converter designed
to transmit analog 4-20mA signals over an industry-standard
current loop. It provides accurate current scaling and output
current limit functions.
to transmit analog 4-20mA signals over an industry-standard
current loop. It provides accurate current scaling and output
current limit functions.
The on-chip voltage regulator (5V) can be used to power
external circuitry. A current return pin (IRET) senses any
current used in external circuitry to assure an accurate
control of the output current.
FEATURES
_ LOW QUIESCENT CURRENT: 130 uA
_ 5V REGULATOR FOR EXTERNAL CIRCUITS
_ LOW SPAN ERROR: 0.05%
_ LOW NONLINEARITY ERROR: 0.003%
_ WIDE-LOOP SUPPLY RANGE: 7.5V to 40V
_ MSOP-8 AND DFN-8 PACKAGES
0-5V To 4-20mA Current-Loop Transmitter Circuit
The AM422 is a low cost monolithic voltage–
to–current converter specially designed for
analog signal transmission. The AM422 is
available in a 3– or 2–wire version, which allows
applications with flexible input voltage
ranges to be used for a standard output current.
Output current range and current offset level
are freely adjustable by external resistors. The
IC consists of three basic sections: an operational
amplifier input stage for single ended
input signals (0.5–4.5V, 0–10V, or other), a
programmable 4.5 to 10V reference for transducer
excitation, and a current output, freely
adjustable in a wide current range (4–20mA,
0–20mA, other). With the broad spectrum of
possible input signals the AM422 is a flexible
and multipurpose voltage–to–current converter
for single ended transducers or voltage transmission.
FEATURES
- Wide Supply Voltage Range: 6...35V
- Wide Operating Temperature Range: –40°C...+85°C
- Adjustable Voltage Reference:4.5 to 10V
- Operational Amplifier Input:0.5...4.5V, 0...5V, other
- Adjustable Offset Current
- Available as Three– (0/4...20mA) or Two–Wire Version (4...20mA)
- Adjustable Output Current Range
- Protection Against Reverse Polarity
- Protected Current Output
AM422 datasheet pdf
to–current converter specially designed for
analog signal transmission. The AM422 is
available in a 3– or 2–wire version, which allows
applications with flexible input voltage
ranges to be used for a standard output current.
Output current range and current offset level
are freely adjustable by external resistors. The
IC consists of three basic sections: an operational
amplifier input stage for single ended
input signals (0.5–4.5V, 0–10V, or other), a
programmable 4.5 to 10V reference for transducer
excitation, and a current output, freely
adjustable in a wide current range (4–20mA,
0–20mA, other). With the broad spectrum of
possible input signals the AM422 is a flexible
and multipurpose voltage–to–current converter
for single ended transducers or voltage transmission.
FEATURES
- Wide Supply Voltage Range: 6...35V
- Wide Operating Temperature Range: –40°C...+85°C
- Adjustable Voltage Reference:4.5 to 10V
- Operational Amplifier Input:0.5...4.5V, 0...5V, other
- Adjustable Offset Current
- Available as Three– (0/4...20mA) or Two–Wire Version (4...20mA)
- Adjustable Output Current Range
- Protection Against Reverse Polarity
- Protected Current Output
AM422 datasheet pdf
The XTR117 is a precision current output converter designed
to transmit analog 4-20mA signals over an industry-standard
current loop. It provides accurate current scaling and output
current limit functions.
to transmit analog 4-20mA signals over an industry-standard
current loop. It provides accurate current scaling and output
current limit functions.
The on-chip voltage regulator (5V) can be used to power
external circuitry. A current return pin (IRET) senses any
current used in external circuitry to assure an accurate
control of the output current.
FEATURES
_ LOW QUIESCENT CURRENT: 130 uA
_ 5V REGULATOR FOR EXTERNAL CIRCUITS
_ LOW SPAN ERROR: 0.05%
_ LOW NONLINEARITY ERROR: 0.003%
_ WIDE-LOOP SUPPLY RANGE: 7.5V to 40V
_ MSOP-8 AND DFN-8 PACKAGES
0-5V To 4-20mA Current-Loop Transmitter Circuit
The AM422 is a low cost monolithic voltage–
to–current converter specially designed for
analog signal transmission. The AM422 is
available in a 3– or 2–wire version, which allows
applications with flexible input voltage
ranges to be used for a standard output current.
Output current range and current offset level
are freely adjustable by external resistors. The
IC consists of three basic sections: an operational
amplifier input stage for single ended
input signals (0.5–4.5V, 0–10V, or other), a
programmable 4.5 to 10V reference for transducer
excitation, and a current output, freely
adjustable in a wide current range (4–20mA,
0–20mA, other). With the broad spectrum of
possible input signals the AM422 is a flexible
and multipurpose voltage–to–current converter
for single ended transducers or voltage transmission.
FEATURES
- Wide Supply Voltage Range: 6...35V
- Wide Operating Temperature Range: –40°C...+85°C
- Adjustable Voltage Reference:4.5 to 10V
- Operational Amplifier Input:0.5...4.5V, 0...5V, other
- Adjustable Offset Current
- Available as Three– (0/4...20mA) or Two–Wire Version (4...20mA)
- Adjustable Output Current Range
- Protection Against Reverse Polarity
- Protected Current Output
AM422 datasheet pdf
to–current converter specially designed for
analog signal transmission. The AM422 is
available in a 3– or 2–wire version, which allows
applications with flexible input voltage
ranges to be used for a standard output current.
Output current range and current offset level
are freely adjustable by external resistors. The
IC consists of three basic sections: an operational
amplifier input stage for single ended
input signals (0.5–4.5V, 0–10V, or other), a
programmable 4.5 to 10V reference for transducer
excitation, and a current output, freely
adjustable in a wide current range (4–20mA,
0–20mA, other). With the broad spectrum of
possible input signals the AM422 is a flexible
and multipurpose voltage–to–current converter
for single ended transducers or voltage transmission.
FEATURES
- Wide Supply Voltage Range: 6...35V
- Wide Operating Temperature Range: –40°C...+85°C
- Adjustable Voltage Reference:4.5 to 10V
- Operational Amplifier Input:0.5...4.5V, 0...5V, other
- Adjustable Offset Current
- Available as Three– (0/4...20mA) or Two–Wire Version (4...20mA)
- Adjustable Output Current Range
- Protection Against Reverse Polarity
- Protected Current Output
AM422 datasheet pdf
Subscribe to:
Posts (Atom)
